Mold Testing, Mold Inspectors and Mold Removal. Miami, Fort Lauderdale, Daytona Beach and all Florida Cities.

Resources

Mold in your Bathroom

Garage concrete floor coated in epoxy picture

One of the most common problems regarding mold and mildew is Bathroom Mold. Firstly this problem occurs because the humidity level in the Bathroom are high. It's usually moist and very warm there and those 2 ingredients are perfect breeding ground for black mold. Below are some tips to reduce your humidity levels in your Bathroom and some tips of what you should do if you think you have mold, anywhere in the home.

Of course there are very technical reports. this is simply the short version article. If you want to know more, then call us today 1-855-255-MOLD.

Preventing Humidity in your Bathroom

Air Flow - you'll want air flowing throughout your Bathroom. Bathrooms sometimes have air flow vents in the apex of the side of the roof. The object is to have the air flowing and prevent it from being still so black mold spores don't settle. Still air keeps humidity better than moving air.

Remove all wet materials - Many times wet, soggy stuff is laying around. These material raises the moisture content level in the air. The more constant moisture, the more likely you'll get black mold. If you find unexpected wet areas, it is probably a sign of a water leak. Water damage and black mold can ensue so fix them immediately. For Water Damage, check out Affordable Restoration. They deal with water and mold damage.

Check regularly - look for signs of mold in the most common places that have the least air flow and the most wet materials: the bathroom and the kitchen. For the best mold inspection, call us 1-855-255-MOLD [6653]. We will send some to your property and visually inspect all the right areas that would lead to black mold. We also can use advanced search technology like a thermal camera that can usually locate water leaks behind walls. If left unchecked these leaks can turn into big mold problems.

Got Black Mold?

Here are some tips you can look for if you think you have black mold:

1. Smell - The smell of dirty old socks or that locker room smell is a good indication you have mold.

2. High humidity - The still, wet feeling you get if you walk into a steamy shower. Remember the high humidity is perfect breeding ground for black mold spores.

3. Water leaks - check the water tanks, under sinks, Bathroom, outside hoses and of course look at your water bill. Did it shoot up recently. IF so, you probably have a water leak and water leaks lead to black mold growing.

4. Stuffy Feeling - The property feels stuffy. Often residents complain of having a stuffy nose. If you find this is the case, have Dade Mold Inspectors check out your property for mold.

These few tips can reduce the chances of black mold growing. Be sure to call us for any information you might want regarding any mold problem you encounter.

Ability of bleach and other biocide treatments to remove and prevent mold growth on Douglas-fir lumber

Molds are an increasingly important issue for all building materials, including wood. While washing with bleach is a commonly recommended method for removing molds, and the associated discolorations, there is surprisingly little information on the effectiveness of this treatment. The ability of mold removal treatments to brighten wood and eliminate fungi was assessed on Douglas-fir (Pseudotsuga menziesii) sapwood lumber heavily colonized with mold and sapstain fungi. The boards were subjected to differentwashing treatments: wiping with bleach solution, wiping withwater, and a no-wash control. Samples were evaluated visually for changes in mold appearance and then fungiwere isolated from the surface of thewood. Replicates from the variouswash treatmentswere further treated with three biocide formulations. The effect of the mold control treatments on visual appearance and fungal diversity was assessed 1 month after treatment. Increasing bleach concentrations from 2.5 up to 20 percent solution had no effect on the appearance of thewood following thewash treatment, nor did such treatments completely eliminate fungi from thewood surface. The chemical mold prevention treatments testedwere not effective in sterilizing thewood, nor did they improve the visual appearance.

Read more about Mold Prevention

Preventing Mold-Related Problems in the Indoor Workplace

This guide provides basic information about mold, mold sources, and building-related illnesses. Brief discussions are included on building design considerations for healthy indoor air, as well as building evaluation and sampling for mold. However, detailed information about indoor air quality diagnostic studies (e.g., normal vs. abnormal levels) and the design and execution of exposure sampling strategies is not included as this information is beyond the scope of this initiative. For approaches to remediation of moldy areas and the appropriate response based on the degree of the contamination, the reader should consult OSHA’s Safety and Health Information Bulletin (SHIB 03-10-10) “A Brief Guide to Mold in the Workplace” (1). Additional information on mold is available through OSHA’s “Molds and Fungi” safety and health topics webpage at http://www.osha.gov/SLTC/molds/index.html, which contains a collection of hyperlinks to various sources of information regarding mold.

Read more about Mold Problems

Mold in Indoor Environments: A Critical Review of Research Studies

Since exposure standards for molds or mycotoxins do not exist, it is useful to have broad knowledge of the potential for exposure and health effects associated with mold in the indoor environment. Headlines about “toxic molds” have elevated the level of concern and response for certain species of mold that are known to produce mycotoxins.

Read more about Mold Removal

To schedule an inspection, please call
1-855-255-6653 or
West Palm Beach: 561 425 9925
Broward: 954 903 3639

or e-mail:
david.rodil@live.com

Click Here to tell a friend about www.DadeMoldInspectors.net

Be sure to visit our new web address:
http://wwww.dademoldinspectors.com

Call Today
1-855-255-6653
West Palm Beach:
561 425 9925
Broward: 954 903 3639

Home

Remediation

Services

Helpful Links

Contact

Water Damage

Foreclosures

Chinese Drywall

Glossary

Resources
CMI and CMRC Certification

Toxic Mold found in wall during our Mold Inspection

common mold spores

em lab testing service
cmrc cmi certifications